Fish Feed Pellet Extruder Machine - Bulk Cloned - Bulk Cloned-manufacture,factory,supplier from China

Twin Screw Fish Feed ExtruderOn April 5, the twin-screw fish feed extruder purchased by the Indian agent was successfully shipped. So, why do more and more customers choose twin-screw extruders? Let's analyze it.Advantages of twin-screw extruder：The function of the extruder screw is to push the material forward in the screw groove, convert the material from solid to molten, and form shear on it, and supply material to the die of the machine head in a fixed and quantitative manner according to a certain compression ratio.

The kinds of fish feed have long long past through a technique from uncooked to cooked, from shallow processing to deep processing, from the original fish and shrimp overwhelmed right now to feeding, to the later matured pellet feeding, to the modern nutrient ratio clinical feeding. the extruded fish feed equipment and tool production line specializes in the production of severa sorts and specifications of extruded aquatic fish feed for small and medium aquaculture farms and person fisheries.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

Advantages of Puffed Floating Fish Feed1. Easy feeding and management to reduce diseasesExtruded aquatic feed can be suspended on the water surface for a long time. There is no need to set up a special feeding platform when feeding, just feeding at a fixed point. Fish need to float on the water surface when feeding, so they can directly observe the feeding situation of the fish, adjust the feeding amount in time, and understand the growth and health status of the fish in a timely manner.

The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be divided into meshing type and non-meshing type. The meshing type can be divided into partial meshing type and full meshing type. According to the rotation direction of the screw, it can be divided into two types: co-rotating and counter-rotating.

The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion CoefficientIn the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much less environmental pollution. Many manufacturers generally Only floating materials are produced. Things to note when using an extruder to produce submersible materials:1. Formula: When designing the formula, it should be noted that the starch content should be low but not absent.

Using floating fish feed machinery to provide aquatic extruded feed now not handiest saves a lot of time, but additionally improves hard work productivity. floating fish feed machinery can produce distinctive length of fish feed.breeders can calculate the quantity of bait to be fed according to the species, specs, quantity, water temperature and feeding rate of the fish to be farmed, and feed them quick, which no longer best saves plenty of time, however additionally improves labor productiveness.Floating fish feed machinery has wide software potentialities.

The moisture content of pellet feed is a very important quality index, which directly affects the quality of pellet feed and the economic benefits of feed enterprises. Effective control of it is one of the key technologies to ensure the quality and safety of feed products. If the moisture content exceeds the specified standard, the pellet feed is prone to mildew and deterioration, which is not conducive to preservation, and will also reduce the content of nutrients. The moisture content also causes unstable product quality and affects the brand reputation of the product.

1. Undertake siemens critical motor, delta inverter, schneider omron abb electric powered components, the world's pinnacle manufacturers, environment friendly and steady operation, reliable great, lengthy lasting, international add-ons, can be at as soon as bought locally, successfully lowering manufacturing price.2.

Advantages of twin-screw extrusion extruder(1) The adaptability of raw materials is wider, and it can adapt to the processing of raw materials with high viscosity, low viscosity, high oil content, high moisture or viscosity, oily, very wet and other slippery materials in single screw (SSE).(2) There are fewer restrictions on the particle size of raw materials, which can be adapted to the processing of raw materials with a wide particle size or from fine powder to coarse powder particles and raw materials with particle sizes outside the specific range of single-screw processing.(3) The material