Fish Feed Extruder Machine For Sale In Nigeria-manufacture,factory,supplier from China

Twin Screw Fish Feed ExtruderOn April 5, the twin-screw fish feed extruder purchased by the Indian agent was successfully shipped. So, why do more and more customers choose twin-screw extruders? Let's analyze it.Advantages of twin-screw extruder：The function of the extruder screw is to push the material forward in the screw groove, convert the material from solid to molten, and form shear on it, and supply material to the die of the machine head in a fixed and quantitative manner according to a certain compression ratio.

Advantages of Puffed Floating Fish Feed1. Easy feeding and management to reduce diseasesExtruded aquatic feed can be suspended on the water surface for a long time. There is no need to set up a special feeding platform when feeding, just feeding at a fixed point. Fish need to float on the water surface when feeding, so they can directly observe the feeding situation of the fish, adjust the feeding amount in time, and understand the growth and health status of the fish in a timely manner.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be divided into meshing type and non-meshing type. The meshing type can be divided into partial meshing type and full meshing type. According to the rotation direction of the screw, it can be divided into two types: co-rotating and counter-rotating.

1. Adsorption properties and their applications (fillers)    Starch can be used as a diluent (or filler) in feed additive products to fill and disperse active ingredients in feed additive products to increase their weight or volume, facilitate formulation molding and dispersion, and further make powders , granules and pellets, etc.    When starch is used as diluent, corn starch is commonly used. It has very stable properties, does not work with most ingredients, and is relatively cheap. It has low hygroscopicity and good appearance and color.

Advantages of twin-screw extrusion extruder(1) The adaptability of raw materials is wider, and it can adapt to the processing of raw materials with high viscosity, low viscosity, high oil content, high moisture or viscosity, oily, very wet and other slippery materials in single screw (SSE).(2) There are fewer restrictions on the particle size of raw materials, which can be adapted to the processing of raw materials with a wide particle size or from fine powder to coarse powder particles and raw materials with particle sizes outside the specific range of single-screw processing.(3) The material

Starch is the main source of carbohydrates in animal feed, which can provide energy requirements for animal growth.Starch can be used as a diluent (or filler) in feed additive products to fill and disperse active ingredients in feed additive products to increase their weight or volume, facilitate formulation molding and dispersion, and further make powders , granules and pellets, etc.When starch is used as diluent, corn starch is commonly used. It has very stable properties, does not work with most ingredients, and is relatively cheap. It has low hygroscopicity and good appearance and color.

Low starch puffing technologyThis article introduces a new type of low-starch extruded fish feed, which can meet the nutritional needs of fish growth and at the same time improve the quality and taste of fish meat. Compared with traditional fish feed, low-starch extruded fish feed has higher nutritional value and lower cost, making it a new choice for healthy breeding.1. Traditional fish feed issuesTraditional fish feed mainly uses starch as the main raw material, but excessive starch content will lead to a decline in fish meat quality and poor taste.

The main factors affecting the final moisture content of feed products are: the moisture content of the feed material itself, the moisture change in the crushing stage, the amount of liquid added in the mixing stage, the moisture content of the steam, the level of tempering, the die hole size and thickness of the die, Cooler air volume and drying time, packaging quality management, the influence of different climate and environmental factors, etc.*Feed ingredient moisture control1.

Because blood meal has high nutritional value and its processing technology and methods are becoming increasingly perfect, its application in pet feed has also received widespread attention. Some pet feed formulas will contain ingredients such as chicken blood meal and hydrolyzed blood meal.1. The application effect of blood meal in pet feedA test was conducted on the effect of puffed blood meal on growing dogs. It was found that adding 5% to 10% of puffed blood meal to the feed can replace a certain proportion of fish meal to achieve the ideal feeding effect.